With a little bit of desoldering wick and flux you can desolder one of the config jumpers on the board and convert the module to UART serial.
Good luck and happy hacking.
Tuesday, May 22, 2018
GY-BNO055 (DX/Banggood/Aliexpress) conversion to serial
The GY-BNO055 sensor board from China ships jumpered for i2c on 0x29. And that's great unless you have a raspberry pi and i2c clock stretching is causing you all kinds of problems.
With a little bit of desoldering wick and flux you can desolder one of the config jumpers on the board and convert the module to UART serial.
Good luck and happy hacking.
With a little bit of desoldering wick and flux you can desolder one of the config jumpers on the board and convert the module to UART serial.
Good luck and happy hacking.
Subscribe to:
Posts (Atom)